- Crushing Equipment
- Ball Mill
- Shaking Table
- Spiral Chute
- Flotation Machine
- Agitation Equipment
- Vibrating Screen
- Jig Machine
- Magnetic Separator
- Spiral Classifier
- Production Line
- Feeder Equipment
- Other Equipment
- Add:No.3 Chuangye Road, Guzhang Industrial Park, Shicheng Country, Ganzhou city, Jiangxi Province, China
- Tel:0086 0797-5882569
- Fax:0086 0797-5882569
- E-mail:baron@jxyishan.com
- Contacts:Baron liu
INTRODUCTION:
BS-K Flotation Machine Introduction
This product can be divided into several units, such as single tank, double tank, three tanks, four tanks, five tanks and six tanks, etc. Since this product has no ability of imbibing the ore pulp and air spontaneously, the flow of ore pulp needs terrace arrangement, and the return of foams depends on the foam pump.
BS-K Flotation Machine Application
Flotation Machine is applicable for the separation of ferrous and non-ferrous metal, as well as the separation of non-metals, such as coal, fluorite and talc.
BS-K Flotation Machine Features
The main shaft of pneumatic
flotation machine BS-K flotation machine is hung at one side of the
frame. With a light structure, it's easy to install the bearing body
with a good perpendicularity. With cone-shaped cross section of the
impeller and radiation shaped stator, the machine is featured with wear
resistance, long service life and powerful agitating force, U-shaped
tank reduces the ore accumulated at the bottom of the tank. With light
main shaft parts and the stator installed at the bottom of the tank,
it's easy to install them. With small installed power, the machine is
energy saving. With compressed air filled in, air bubbles disperse
uniformly and the foam is stale. Thus, the suspension of mineral grains
is good with a high recovery rate.
BS-K Flotation Machine Working Principle
Negative pressure is formed from centrifugal effect through the rotation of impeller driven by the V-belt of the motor, which on the one hand intakes sufficient air to mix with the ore pulp, and on the other hand, agitates the ore pulp and mixes the pulp with the chemical reagent; In the meanwhile, makes the froth thin, keep the minerals adhering to the froth and float to the surface of ore pulp before producing mineralized froth. Adjust the height of flashboard, control the fluid level, and the scraper will take our the useful froth.
Flotation Machine Position Chart
Flotation Machine in Mine Site and Delivery Photo
XCF Type Inflatable Flotation Machine
Model | Capacity (m3/min) | Impeller Dia(mm) |
Impeller
Revolution (r.p.m) |
Air pressure
of
blower (kpa) |
Max of air filling (m3/m2.min) |
Power for
agitation (kw) |
Power for scraper (kw) |
Weight (t) |
XCF-1 | 0.2-1 | 400 | 358 | ≥12.6 | ≤2 | 5. 5 | 1.1 | 1.1 |
XCF-2 | 0.4-2 | 470 | 331 | ≥14.7 | ≤2 | 7. 5 | 1.1 | 1.6 |
XCF-3 | 0. 6-3 | 540 | 266 | ≥19.8 | ≤2 | 11 | 1.5 | 2.2 |
XCF-4 | 1.2-4 | 620 | 215 | ≥19.8 | ≤2 | 15 | 1.5 | 2.6 |
XCF-8 | 3.0-8 | 720 | 185 | ≥21.6 | ≤2 | 22 | 1.5 | 4.4 |
XCF-16 | 4.0-16 | 860 | 160 | ≥25.5 | ≤2 | 37 | 1.5 | 6.5 |
XCF-24 | 4.0-24 | 950 | 153 | ≥30.4 | ≤2 | 37 | 1.5 | 8 |
XCF-38 | 10-38 | 1050 | 148 | ≥34.3 | ≤2 | 45 | 1.5 | 11 |
KYF Type Inflatable Flotation Machine
Model | Capacity (m3/min) |
Impeller Dia (mm) |
Impeller Revolution (r.p.m) |
Air pressure of blower (kpa) |
Max of air filling (m3/m2.min) |
Power for agitation (kw) |
Power for scraper (kw) |
Weight (t) |
KYF-1 | 0.2-1 | 340 | 281 | ≥12.6 | ≤2 | 4 | 1.1 | 0.8 |
KYF-2 | 0.4-2 | 410 | 247 | ≥14.7 | ≤2 | 5.5 | 1.1 | 1.4 |
KYF-3 | 0.6-3 | 480 | 219 | ≥19.8 | ≤2 | 7.5 | 1.5 | 1.8 |
KYF-4 | 1.2-4 | 550 | 200 | ≥19.8 | ≤2 | 11 | 1.5 | 2.2 |
KYF-8 | 3.0-8 | 630 | 175 | ≥21.6 | ≤2 | 15 | 1.5 | 4.2 |
KYF-16 | 4.0-16 | 740 | 160 | ≥25.5 | ≤2 | 30 | 1.5 | 6 |
KYF-24 | 4.0-24 | 800 | 150 | ≥30.4 | ≤2 | 30 | 1.5 | 7.5 |
KYF-38 | 10-38 | 880 | 138 | ≥34.3 | ≤2 | 37 | 1.5 |